Scientific Linux 4.2 Release Notes --------------------------------------------------------------------------- Introduction The following topics are covered in this document: o Changes to the Scientific Linux installation program (Anaconda) o General information o Kernel Notes o Changes to drivers and hardware support o Changes to packages Installation Related Notes The following section includes information specific to installation of Scientific Linux and the Anaconda installation program. Note In order to upgrade an already-installed Scientific Linux 4.x system to 4.2, you should use yum or apt to update those packages that have changed. You may use Anaconda to perform a fresh installation of Scientific Linux 4.2 or to perform an upgrade from the latest updated version of Scientific Linux 3.0.x to Scientific Linux 4.x. General Information This section contains general information not specific to any other section of this document. o Scientific Linux 4.2 includes a technology preview release of SystemTap, a new dynamic system profiling framework. Users are encouraged to find more information and provide feedback on the technology preview at the SystemTap project web site: http://sources.redhat.com/systemtap Note that this technology preview release of SystemTap is not supported for use in production environments, and that SystemTap interfaces and APIs are subject to change during the technology preview phase. A fully supported release of SystemTap is planned for a future release of Scientific Linux 4.x. o Scientific Linux 4.2 now includes support for the Russian language via UTF-8 encoding. o In RPM versions 4.1 and greater (included in Scientific Linux 3.0.x and later releases), the rpm command no longer uses the name of the package to determine what is being upgraded or freshened (the -U or -F flags, respectively). Instead, rpm analyzes both what the package provides and the package name. This change was made in order to support obsoleting of packages based on what it provides rather than package names only. However, this has led to behavior changes between pre-4.1 and post-4.1 versions of rpm when using the -U or -F flags to install newer versions of packages. For example, if you have both the kernel and kernel-smp packages installed and issue the following command: rpm -F kernel-.rpm The kernel-smp package will be entirely removed, leaving only an upgraded kernel package. This is because both packages provide kernel capabilities and the kernel package is the primary provider of kernel capabilities because the name of the package is an exact match, which means that the kernel package obsoletes the kernel-smp package. Therefore, it is not recommended that users use the -F or -U flag when upgrading kernels. Use the -i flag instead. o The current ext3 file system limit in Scientific Linux 4.2 is 8 terabytes. The e2fsprogs package has been updated to adhere to this file system limit. Kernel Notes This section contains notes relating to the Scientific Linux 4.2 kernel. o The diskdump facility has been updated in Scientific Linux 4.2. diskdump is an automated system that saves data from system memory in the event of a kernel panic or oops. The updated version of diskdump can now be configured to save partial dumps of memory, which can be useful if, for example, you want to save only kernel memory during a panic on a system with a large amount of memory. For more information, refer to the documentation included with the diskdumputils package: /usr/share/doc/diskdumputils-1.1.7-2/README o In-kernel key management support has been added to the kernel in Scientific Linux 4.2. This facility permits the association of sets of keys (keyrings) with processes for file systems (such as OpenAFS) and other applicable subsystems. This facility is enabled by means of the CONFIG_KEYS option in the kernel configuration. Keys can then be manipulated via the keyctl utility in the keyutils package. o The kernel shipped in Scientific Linux 4.2 features an update of the OpenIPMI module. OpenIPMI is an open source implementation designed for monitoring and management of server and telecommunications components that support the Intelligent Platform Management Interface (IPMI) standard. o Kernel and user support for the audit subsystem has been improved in Scientific Linux 4.2. The auditing subsystem can be used by administrators to monitor system calls and file system access for CAPP compliance or any other auditing requirement. Highlights of this release include: . Auditing is disabled by default in the kernel, but when the auditd package is installed, the audit daemon, auditd, enables auditing when it starts. . When auditd is running, audit messages are sent to a user configurable log file, which by default is /var/log/audit/audit.log. If auditd is not running, the audit messages are sent to syslog, which is configured by default to put messages in /var/log/messages. If the audit subsystem is not enabled, no audit messages are generated . These audit messages include SELinux AVC messages. Previously, AVC messages were sent to syslog, but are now sent by the audit daemon into the audit log, /var/log/audit/audit.log. If audit is not enabled in the kernel, the messages are sent to syslog. . To fully disable auditing in the kernel, boot with the parameter audit=0. You will also need to turn off auditd with chkconfig auditd off 2345. You can turn off audit in the kernel in run-time with auditctl -e 0. Scientific Linux 4.2 contains the initial release for audit subsystem userspace services and utilities. The audit daemon (auditd) retrieves audit event data from the kernel's audit netlink interface and saves it to a log file. auditd configuration variables such as output file configuration and log file disk usage parameters can be configured in the /etc/auditd.conf file. For more information, refer to the auditd(8) and auditd.conf(5) manual pages. It should be noted that anyone setting up their system for CAPP style auditing should dedicate a disk partition exclusively for the audit daemon's use. It should be mounted at /var/log/audit. Administrators can also use the auditctl utility to change auditing parameters, syscall rules, and file system watches while the auditd daemon is running. For more information, refer to the auditctl(8) manual page. A sample CAPP configuration is included and may be copied to /etc/audit.rules so that it takes effect. Audit log data can be viewed and searched with the ausearch utility. Refer to the ausearch(8) man page for search options. Changes to Drivers and Hardware Support This update includes bug fixes for a number of drivers. The more significant driver updates are listed below. In some cases, the original driver has been preserved under a different name, and is available as a non-default alternative for organizations that wish to migrate their driver configuration to the latest versions at a later time. Note The migration to the latest drivers should be completed before the next Scientific Linux update is applied, because in most cases only one older-revision driver will be preserved for each update. The following device drivers are updated in Scientific Linux 4.2: o 3Com Etherlink III 3C59X Adapter (3c59x) o Compaq SmartArray controllers (cciss) o Intel(R) PRO/100 Fast Ethernet adapter (e100) o Intel(R) PRO/1000 Ethernet adapter (e1000) o Intel(R) Pro/Wireless 2100 adapter (ipw2100) o Intel(R) PRO/10GbE adapter family (ixgb) o Emulex LightPulse Fibre Channel HBA (lpfc) o LSI Logic MegaRAID Controller family (megaraid_mbox, megaraid_mm) o Fusion MPT base driver (mptbase) o QLogic Fibre Channel HBA (qla2xxx) o SATA support (core, libata, and drivers) o Broadcom Tigon 3 Ethernet Adapter (tg3) o IBM zSeries Fibre Channel Protocol adapter (zfcp) Changes to Packages This section contains listings of packages that have been updated or added from Scientific Linux 4.x as part of 4.2. Note These package lists include packages from all variants of Scientific Linux 4.x. Your system may not include every one of the packages listed here. The following packages have been updated from the release of Scientific Linux 4.1: o HelixPlayer-1.0.4-1.1.EL4.2 => HelixPlayer-1.0.5-0.EL4.1 o ImageMagick-6.0.7.1-10 => ImageMagick-6.0.7.1-12 o ImageMagick-c++-6.0.7.1-10 => ImageMagick-c++-6.0.7.1-12 o ImageMagick-c++-devel-6.0.7.1-10 => ImageMagick-c++-devel-6.0.7.1-12 o ImageMagick-devel-6.0.7.1-10 => ImageMagick-devel-6.0.7.1-12 o ImageMagick-perl-6.0.7.1-10 => ImageMagick-perl-6.0.7.1-12 o SysVinit-2.85-34 => SysVinit-2.85-34.3 o alsa-utils-1.0.6-3 => alsa-utils-1.0.6-4 o am-utils-6.0.9-10 => am-utils-6.0.9-15.RHEL4 o anaconda-10.1.1.19-1 => anaconda-10.1.1.24-1 o anaconda-runtime-10.1.1.19-1 => anaconda-runtime-10.1.1.24-1 o apr-0.9.4-24.3 => apr-0.9.4-24.5 o apr-devel-0.9.4-24.3 => apr-devel-0.9.4-24.5 o apr-util-0.9.4-17 => apr-util-0.9.4-21 o apr-util-devel-0.9.4-17 => apr-util-devel-0.9.4-21 o arpwatch-2.1a13-9.RHEL4 => arpwatch-2.1a13-10.RHEL4 o at-3.1.8-60 => at-3.1.8-78_EL4 o audit-0.5-1 => audit-1.0.3-4.EL4 o autofs-4.1.3-131 => autofs-4.1.3-155 o binutils-2.15.92.0.2-13 => binutils-2.15.92.0.2-15 o booty-0.44-1 => booty-0.44.3-1 o bzip2-1.0.2-13 => bzip2-1.0.2-13.EL4.2 o bzip2-devel-1.0.2-13 => bzip2-devel-1.0.2-13.EL4.2 o bzip2-libs-1.0.2-13 => bzip2-libs-1.0.2-13.EL4.2 o compat-openldap-2.1.30-2 => compat-openldap-2.1.30-3 o comps-4AS-0.20050525 => comps-4AS-0.20050831 o control-center-2.8.0-12 => control-center-2.8.0-12.rhel4.2 o coreutils-5.2.1-31.1 => coreutils-5.2.1-31.2 o cpio-2.5-7.EL4.1 => cpio-2.5-8.RHEL4 o cpp-3.4.3-22.1 => cpp-3.4.4-2 o crash-3.10-11 => crash-4.0-2 o cups-1.1.22-0.rc1.9.6 => cups-1.1.22-0.rc1.9.7 o cups-devel-1.1.22-0.rc1.9.6 => cups-devel-1.1.22-0.rc1.9.7 o cups-libs-1.1.22-0.rc1.9.6 => cups-libs-1.1.22-0.rc1.9.7 o cyrus-imapd-2.2.10-1.RHEL4.1 => cyrus-imapd-2.2.12-3.RHEL4.1 o cyrus-imapd-devel-2.2.10-1.RHEL4.1 => cyrus-imapd-devel-2.2.12-3.RHEL4.1 o cyrus-imapd-murder-2.2.10-1.RHEL4.1 => cyrus-imapd-murder-2.2.12-3.RHEL4.1 o cyrus-imapd-nntp-2.2.10-1.RHEL4.1 => cyrus-imapd-nntp-2.2.12-3.RHEL4.1 o cyrus-imapd-utils-2.2.10-1.RHEL4.1 => cyrus-imapd-utils-2.2.12-3.RHEL4.1 o dbus-0.22-12.EL.2 => dbus-0.22-12.EL.5 o dbus-devel-0.22-12.EL.2 => dbus-devel-0.22-12.EL.5 o dbus-glib-0.22-12.EL.2 => dbus-glib-0.22-12.EL.5 o dbus-python-0.22-12.EL.2 => dbus-python-0.22-12.EL.5 o dbus-x11-0.22-12.EL.2 => dbus-x11-0.22-12.EL.5 o devhelp-0.9.2-2.4.4 => devhelp-0.9.2-2.4.6 o devhelp-devel-0.9.2-2.4.4 => devhelp-devel-0.9.2-2.4.6 o device-mapper-1.01.01-1.RHEL4 => device-mapper-1.01.04-1.0.RHEL4 o diskdumputils-1.0.1-5 => diskdumputils-1.1.9-4 o dmraid-1.0.0.rc6.1-3_RHEL4_U1 => dmraid-1.0.0.rc8-1_RHEL4_U o dump-0.4b37-1 => dump-0.4b39-3.EL4.2 o e2fsprogs-1.35-12.1.EL4 => e2fsprogs-1.35-12.2.EL4 o e2fsprogs-devel-1.35-12.1.EL4 => e2fsprogs-devel-1.35-12.2.EL4 o ethereal-0.10.11-1.EL4.1 => ethereal-0.10.12-1.EL4.1 o ethereal-gnome-0.10.11-1.EL4.1 => ethereal-gnome-0.10.12-1.EL4.1 o evolution-2.0.2-16 => evolution-2.0.2-22 o evolution-connector-2.0.2-5 => evolution-connector-2.0.2-8 o evolution-data-server-1.0.2-7 => evolution-data-server-1.0.2-9 o evolution-data-server-devel-1.0.2-7 => evolution-data-server-devel-1.0.2-9 o evolution-devel-2.0.2-16 => evolution-devel-2.0.2-22 o evolution-webcal-1.0.10-1 => evolution-webcal-1.0.10-3 o fetchmail-6.2.5-6 => fetchmail-6.2.5-6.el4.2 o firefox-1.0.4-1.4.1 => firefox-1.0.6-1.4.1 o firstboot-1.3.39-2 => firstboot-1.3.39-4 o freeradius-1.0.1-2.RHEL4 => freeradius-1.0.1-3.RHEL4 o freeradius-mysql-1.0.1-2.RHEL4 => freeradius-mysql-1.0.1-3.RHEL4 o freeradius-postgresql-1.0.1-2.RHEL4 => freeradius-postgresql-1.0.1-3.RHEL4 o freeradius-unixODBC-1.0.1-2.RHEL4 => freeradius-unixODBC-1.0.1-3.RHEL4 o gaim-1.2.1-6.el4 => gaim-1.3.1-0.el4.3 o gamin-0.0.17-4 => gamin-0.1.1-3.EL4 o gamin-devel-0.0.17-4 => gamin-devel-0.1.1-3.EL4 o gcc-3.4.3-22.1 => gcc-3.4.4-2 o gcc-c++-3.4.3-22.1 => gcc-c++-3.4.4-2 o gcc-g77-3.4.3-22.1 => gcc-g77-3.4.4-2 o gcc-gnat-3.4.3-22.1 => gcc-gnat-3.4.4-2 o gcc-java-3.4.3-22.1 => gcc-java-3.4.4-2 o gcc-objc-3.4.3-22.1 => gcc-objc-3.4.4-2 o gcc4-4.0.0-0.14.EL4 => gcc4-4.0.1-4.EL4.2 o gcc4-c++-4.0.0-0.14.EL4 => gcc4-c++-4.0.1-4.EL4.2 o gcc4-gfortran-4.0.0-0.14.EL4 => gcc4-gfortran-4.0.1-4.EL4.2 o gdb-6.3.0.0-0.31 => gdb-6.3.0.0-1.59 o gdm-2.6.0.5-7.rhel4.1 => gdm-2.6.0.5-7.rhel4.4 o gedit-2.8.1-3 => gedit-2.8.1-4 o gedit-devel-2.8.1-3 => gedit-devel-2.8.1-4 o gftp-2.0.17-3 => gftp-2.0.17-5 o glibc-2.3.4-2.9 => glibc-2.3.4-2.13 o glibc-common-2.3.4-2.9 => glibc-common-2.3.4-2.13 o glibc-devel-2.3.4-2.9 => glibc-devel-2.3.4-2.13 o glibc-headers-2.3.4-2.9 => glibc-headers-2.3.4-2.13 o glibc-kernheaders-2.4-9.1.87 => glibc-kernheaders-2.4-9.1.98.EL o glibc-profile-2.3.4-2.9 => glibc-profile-2.3.4-2.13 o glibc-utils-2.3.4-2.9 => glibc-utils-2.3.4-2.13 o gnome-desktop-2.8.0-3 => gnome-desktop-2.8.0-5 o gnome-desktop-devel-2.8.0-3 => gnome-desktop-devel-2.8.0-5 o gnome-icon-theme-2.8.0-1 => gnome-icon-theme-2.8.0-1.el4.1.3 o gnome-terminal-2.7.3-1 => gnome-terminal-2.7.3-2 o gnutls-1.0.20-3 => gnutls-1.0.20-3.2.1 o gnutls-devel-1.0.20-3 => gnutls-devel-1.0.20-3.2.1 o gpdf-2.8.2-4.3 => gpdf-2.8.2-4.4 o grub-0.95-3.1 => grub-0.95-3.5 o gtk-engines-0.12-5 => gtk-engines-0.12-6.el4 o gtk2-engines-2.2.0-6 => gtk2-engines-2.2.0-7.el4 o gtkhtml3-3.3.2-3 => gtkhtml3-3.3.2-6.EL o gtkhtml3-devel-3.3.2-3 => gtkhtml3-devel-3.3.2-6.EL o gzip-1.3.3-13 => gzip-1.3.3-15.rhel4 o hotplug-2004_04_01-7.5 => hotplug-2004_04_01-7.6 o httpd-2.0.52-12.ent => httpd-2.0.52-18.ent o httpd-devel-2.0.52-12.ent => httpd-devel-2.0.52-18.ent o gtkhtml3-3.3.2-3 => gtkhtml3-3.3.2-6.EL o gtkhtml3-devel-3.3.2-3 => gtkhtml3-devel-3.3.2-6.EL o gzip-1.3.3-13 => gzip-1.3.3-15.rhel4 o hotplug-2004_04_01-7.5 => hotplug-2004_04_01-7.6 o httpd-2.0.52-12.ent => httpd-2.0.52-18.ent o httpd-devel-2.0.52-12.ent => httpd-devel-2.0.52-18.ent o httpd-manual-2.0.52-12.ent => httpd-manual-2.0.52-18.ent o httpd-suexec-2.0.52-12.ent => httpd-suexec-2.0.52-18.ent o hwdata-0.146.10.EL-1 => hwdata-0.146.11.EL-1 o iiimf-csconv-12.1-13.EL => iiimf-csconv-12.1-13.EL.2 o iiimf-docs-12.1-13.EL => iiimf-docs-12.1-13.EL.2 o iiimf-emacs-12.1-13.EL => iiimf-emacs-12.1-13.EL.2 o iiimf-gnome-im-switcher-12.1-13.EL => iiimf-gnome-im-switcher-12.1-13.EL.2 o iiimf-gtk-12.1-13.EL => iiimf-gtk-12.1-13.EL.2 o iiimf-le-canna-12.1-13.EL => iiimf-le-canna-12.1-13.EL.2 o iiimf-le-hangul-12.1-13.EL => iiimf-le-hangul-12.1-13.EL.2 o iiimf-le-sun-thai-12.1-13.EL => iiimf-le-sun-thai-12.1-13.EL.2 o iiimf-le-unit-12.1-13.EL => iiimf-le-unit-12.1-13.EL.2 o iiimf-libs-12.1-13.EL => iiimf-libs-12.1-13.EL.2 o iiimf-libs-devel-12.1-13.EL => iiimf-libs-devel-12.1-13.EL.2 o iiimf-server-12.1-13.EL => iiimf-server-12.1-13.EL.2 o iiimf-x-12.1-13.EL => iiimf-x-12.1-13.EL.2 o indexhtml-4-2 => indexhtml-4.1-1 o initscripts-7.93.13.EL-2 => initscripts-7.93.20.EL-1 o iputils-20020927-16 => iputils-20020927-18.EL4.1 o irb-1.8.1-7.EL4.0 => irb-1.8.1-7.EL4.1 o kdebase-3.3.1-5.5 => kdebase-3.3.1-5.8 o kdebase-devel-3.3.1-5.5 => kdebase-devel-3.3.1-5.8 o kdegraphics-3.3.1-3.3 => kdegraphics-3.3.1-3.4 o kdegraphics-devel-3.3.1-3.3 => kdegraphics-devel-3.3.1-3.4 o kdelibs-3.3.1-3.10 => kdelibs-3.3.1-3.11 o kdelibs-devel-3.3.1-3.10 => kdelibs-devel-3.3.1-3.11 o kdenetwork-3.3.1-2 => kdenetwork-3.3.1-2.3 o kdenetwork-devel-3.3.1-2 => kdenetwork-devel-3.3.1-2.3 o kdenetwork-nowlistening-3.3.1-2 => kdenetwork-nowlistening-3.3.1-2.3 o kernel-2.6.9-11.EL => kernel-2.6.9-17.EL o kernel-devel-2.6.9-11.EL => kernel-devel-2.6.9-17.EL o kernel-doc-2.6.9-11.EL => kernel-doc-2.6.9-17.EL o kernel-hugemem-2.6.9-11.EL => kernel-hugemem-2.6.9-17.EL o kernel-hugemem-devel-2.6.9-11.EL => kernel-hugemem-devel-2.6.9-17.EL o kernel-smp-2.6.9-11.EL => kernel-smp-2.6.9-17.EL o kernel-smp-devel-2.6.9-11.EL => kernel-smp-devel-2.6.9-17.EL o kernel-utils-2.4-13.1.66 => kernel-utils-2.4-13.1.69 o krb5-devel-1.3.4-12 => krb5-devel-1.3.4-17 o krb5-libs-1.3.4-12 => krb5-libs-1.3.4-17 o krb5-server-1.3.4-12 => krb5-server-1.3.4-17 o krb5-workstation-1.3.4-12 => krb5-workstation-1.3.4-17 o kudzu-1.1.95.11-2 => kudzu-1.1.95.15-1 o kudzu-devel-1.1.95.11-2 => kudzu-devel-1.1.95.15-1 o libf2c-3.4.3-22.1 => libf2c-3.4.4-2 o libgal2-2.2.3-4 => libgal2-2.2.3-10 o libgal2-devel-2.2.3-4 => libgal2-devel-2.2.3-10 o libgcc-3.4.3-22.1 => libgcc-3.4.4-2 o libgcj-3.4.3-22.1 => libgcj-3.4.4-2 o libgcj-devel-3.4.3-22.1 => libgcj-devel-3.4.4-2 o libgfortran-4.0.0-0.14.EL4 => libgfortran-4.0.1-4.EL4.2 o libgnat-3.4.3-22.1 => libgnat-3.4.4-2 o libmudflap-4.0.0-0.14.EL4 => libmudflap-4.0.1-4.EL4.2 o libmudflap-devel-4.0.0-0.14.EL4 => libmudflap-devel-4.0.1-4.EL4.2 o libobjc-3.4.3-22.1 => libobjc-3.4.4-2 o libpcap-0.8.3-9.RHEL4 => libpcap-0.8.3-10.RHEL4 o libsoup-2.2.1-1 => libsoup-2.2.1-2 o libsoup-devel-2.2.1-1 => libsoup-devel-2.2.1-2 o libstdc++-3.4.3-22.1 => libstdc++-3.4.4-2 o libstdc++-devel-3.4.3-22.1 => libstdc++-devel-3.4.4-2 o libwnck-2.8.1-1 => libwnck-2.8.1-1.rhel4.1 o libwnck-devel-2.8.1-1 => libwnck-devel-2.8.1-1.rhel4.1 o lockdev-1.0.1-3 => lockdev-1.0.1-6.1 o lockdev-devel-1.0.1-3 => lockdev-devel-1.0.1-6.1 o logrotate-3.7.1-2 => logrotate-3.7.1-5.RHEL4 o logwatch-5.2.2-1 => logwatch-5.2.2-1.EL4.1 o lvm2-2.01.08-1.0.RHEL4 => lvm2-2.01.14-1.0.RHEL4 o man-pages-1.67-3 => man-pages-1.67-7.EL4 o metacity-2.8.6-2.1 => metacity-2.8.6-2.8 o mikmod-3.1.6-30.1 => mikmod-3.1.6-32.EL4 o mikmod-devel-3.1.6-30.1 => mikmod-devel-3.1.6-32.EL4 o mkinitrd-4.2.1.3-1 => mkinitrd-4.2.1.6-1 o mod_dav_svn-1.1.1-2.1 => mod_dav_svn-1.1.4-2.ent o mod_ssl-2.0.52-12.ent => mod_ssl-2.0.52-18.ent o mozilla-1.7.7-1.4.2 => mozilla-1.7.10-1.4.1 o mozilla-chat-1.7.7-1.4.2 => mozilla-chat-1.7.10-1.4.1 o mozilla-devel-1.7.7-1.4.2 => mozilla-devel-1.7.10-1.4.1 o mozilla-dom-inspector-1.7.7-1.4.2 => mozilla-dom-inspector-1.7.10-1.4.1 o mozilla-js-debugger-1.7.7-1.4.2 => mozilla-js-debugger-1.7.10-1.4.1 o mozilla-mail-1.7.7-1.4.2 => mozilla-mail-1.7.10-1.4.1 o mozilla-nspr-1.7.7-1.4.2 => mozilla-nspr-1.7.10-1.4.1 o mozilla-nspr-devel-1.7.7-1.4.2 => mozilla-nspr-devel-1.7.10-1.4.1 o mozilla-nss-1.7.7-1.4.2 => mozilla-nss-1.7.10-1.4.1 o mozilla-nss-devel-1.7.7-1.4.2 => mozilla-nss-devel-1.7.10-1.4.1 o mysql-4.1.10a-2.RHEL4.1 => mysql-4.1.12-3.RHEL4.1 o mysql-bench-4.1.10a-2.RHEL4.1 => mysql-bench-4.1.12-3.RHEL4.1 o mysql-devel-4.1.10a-2.RHEL4.1 => mysql-devel-4.1.12-3.RHEL4.1 o mysql-server-4.1.10a-2.RHEL4.1 => mysql-server-4.1.12-3.RHEL4.1 o net-snmp-5.1.2-11 => net-snmp-5.1.2-11.EL4.4 o net-snmp-devel-5.1.2-11 => net-snmp-devel-5.1.2-11.EL4.4 o net-snmp-libs-5.1.2-11 => net-snmp-libs-5.1.2-11.EL4.4 o net-snmp-perl-5.1.2-11 => net-snmp-perl-5.1.2-11.EL4.4 o net-snmp-utils-5.1.2-11 => net-snmp-utils-5.1.2-11.EL4.4 o netconfig-0.8.21-1 => netconfig-0.8.21-1.1 o nfs-utils-1.0.6-46 => nfs-utils-1.0.6-64.EL4 o nptl-devel-2.3.4-2.9 => nptl-devel-2.3.4-2.13 o nscd-2.3.4-2.9 => nscd-2.3.4-2.13 o openldap-2.2.13-2 => openldap-2.2.13-3 o openldap-clients-2.2.13-2 => openldap-clients-2.2.13-3 o openldap-devel-2.2.13-2 => openldap-devel-2.2.13-3 o openldap-servers-2.2.13-2 => openldap-servers-2.2.13-3 o openldap-servers-sql-2.2.13-2 => openldap-servers-sql-2.2.13-3 o openoffice.org-1.1.2-24.6.0.EL4 => openoffice.org-1.1.2-28.6.0.EL4 o openoffice.org-i18n-1.1.2-24.6.0.EL4 => openoffice.org-i18n-1.1.2-28.6.0.EL4 o openoffice.org-kde-1.1.2-24.6.0.EL4 => openoffice.org-kde-1.1.2-28.6.0.EL4 o openoffice.org-libs-1.1.2-24.6.0.EL4 => openoffice.org-libs-1.1.2-28.6.0.EL4 o openssh-3.9p1-8.RHEL4.4 => openssh-3.9p1-8.RHEL4.8 o openssh-askpass-3.9p1-8.RHEL4.4 => openssh-askpass-3.9p1-8.RHEL4.8 o openssh-askpass-gnome-3.9p1-8.RHEL4.4 => openssh-askpass-gnome-3.9p1-8.RHEL4.8 o openssh-clients-3.9p1-8.RHEL4.4 => openssh-clients-3.9p1-8.RHEL4.8 o openssh-server-3.9p1-8.RHEL4.4 => openssh-server-3.9p1-8.RHEL4.8 o openssl-0.9.7a-43.1 => openssl-0.9.7a-43.2 o openssl-devel-0.9.7a-43.1 => openssl-devel-0.9.7a-43.2 o openssl-perl-0.9.7a-43.1 => openssl-perl-0.9.7a-43.2 o openssl096b-0.9.6b-22.1 => openssl096b-0.9.6b-22.3 o oprofile-0.8.1-11 => oprofile-0.8.1-21 o oprofile-devel-0.8.1-11 => oprofile-devel-0.8.1-21 o pam-0.77-66.5 => pam-0.77-66.11 o pam-devel-0.77-66.5 => pam-devel-0.77-66.11 o pam_krb5-2.1.2-1 => pam_krb5-2.1.8-1 o passwd-0.68-10 => passwd-0.68-10.1 o pdksh-5.2.14-30 => pdksh-5.2.14-30.3 o perl-5.8.5-12.1 => perl-5.8.5-16.RHEL4 o perl-Cyrus-2.2.10-1.RHEL4.1 => perl-Cyrus-2.2.12-3.RHEL4.1 o perl-suidperl-5.8.5-12.1.1 => perl-suidperl-5.8.5-16.RHEL4 o php-4.3.9-3.6 => php-4.3.9-3.8 o php-devel-4.3.9-3.6 => php-devel-4.3.9-3.8 o php-domxml-4.3.9-3.6 => php-domxml-4.3.9-3.8 o php-gd-4.3.9-3.6 => php-gd-4.3.9-3.8 o php-imap-4.3.9-3.6 => php-imap-4.3.9-3.8 o php-ldap-4.3.9-3.6 => php-ldap-4.3.9-3.8 o php-mbstring-4.3.9-3.6 => php-mbstring-4.3.9-3.8 o php-mysql-4.3.9-3.6 => php-mysql-4.3.9-3.8 o php-ncurses-4.3.9-3.6 => php-ncurses-4.3.9-3.8 o php-odbc-4.3.9-3.6 => php-odbc-4.3.9-3.8 o php-pear-4.3.9-3.6 => php-pear-4.3.9-3.8 o php-pgsql-4.3.9-3.6 => php-pgsql-4.3.9-3.8 o php-snmp-4.3.9-3.6 => php-snmp-4.3.9-3.8 o php-xmlrpc-4.3.9-3.6 => php-xmlrpc-4.3.9-3.8 o policycoreutils-1.18.1-4.3 => policycoreutils-1.18.1-4.7 o popt-1.9.1-9_nonptl => popt-1.9.1-11_nonptl o postgresql-7.4.7-2.RHEL4.1 => postgresql-7.4.8-1.RHEL4.1 o postgresql-contrib-7.4.7-2.RHEL4.1 => postgresql-contrib-7.4.8-1.RHEL4.1 o postgresql-devel-7.4.7-2.RHEL4.1 => postgresql-devel-7.4.8-1.RHEL4.1 o postgresql-docs-7.4.7-2.RHEL4.1 => postgresql-docs-7.4.8-1.RHEL4.1 o postgresql-jdbc-7.4.7-2.RHEL4.1 => postgresql-jdbc-7.4.8-1.RHEL4.1 o postgresql-libs-7.4.7-2.RHEL4.1 => postgresql-libs-7.4.8-1.RHEL4.1 o postgresql-pl-7.4.7-2.RHEL4.1 => postgresql-pl-7.4.8-1.RHEL4.1 o postgresql-python-7.4.7-2.RHEL4.1 => postgresql-python-7.4.8-1.RHEL4.1 o postgresql-server-7.4.7-2.RHEL4.1 => postgresql-server-7.4.8-1.RHEL4.1 o postgresql-tcl-7.4.7-2.RHEL4.1 => postgresql-tcl-7.4.8-1.RHEL4.1 o postgresql-test-7.4.7-2.RHEL4.1 => postgresql-test-7.4.8-1.RHEL4.1 o procps-3.2.3-8.1 => procps-3.2.3-8.2 o pump-devel-0.8.21-1 => pump-devel-0.8.21-1.1 o rdist-6.1.5-38 => rdist-6.1.5-38.40.1 o redhat-artwork-0.120-1.1E => redhat-artwork-0.120.1-1.2E o redhat-logos-1.1.25-1 => redhat-logos-1.1.26-1 o redhat-lsb-1.3-10.EL => redhat-lsb-3.0-8.EL o redhat-release-4AS-2.4 => redhat-release-4AS-2.8 o rhgb-0.14.1-5 => rhgb-0.14.1-8 o rhn-applet-2.1.17-5 => rhn-applet-2.1.20-4 o rhnlib-1.8-6.p23 => rhnlib-1.8.1-1.p23.1 o rhpl-0.148.2-1 => rhpl-0.148.3-1 o rmt-0.4b37-1 => rmt-0.4b39-3.EL4.2 o rpm-4.3.3-9_nonptl => rpm-4.3.3-11_nonptl o rpm-build-4.3.3-9_nonptl => rpm-build-4.3.3-11_nonptl o rpm-devel-4.3.3-9_nonptl => rpm-devel-4.3.3-11_nonptl o rpm-libs-4.3.3-9_nonptl => rpm-libs-4.3.3-11_nonptl o rpm-python-4.3.3-9_nonptl => rpm-python-4.3.3-11_nonptl o rpmdb-redhat-4-0.20050525 => rpmdb-redhat-4-0.20050831 o ruby-1.8.1-7.EL4.0 => ruby-1.8.1-7.EL4.1 o ruby-devel-1.8.1-7.EL4.0 => ruby-devel-1.8.1-7.EL4.1 o ruby-docs-1.8.1-7.EL4.0 => ruby-docs-1.8.1-7.EL4.1 o ruby-libs-1.8.1-7.EL4.0 => ruby-libs-1.8.1-7.EL4.1 o ruby-mode-1.8.1-7.EL4.0 => ruby-mode-1.8.1-7.EL4.1 o ruby-tcltk-1.8.1-7.EL4.0 => ruby-tcltk-1.8.1-7.EL4.1 o rusers-0.17-41 => rusers-0.17-41.40.1 o rusers-server-0.17-41 => rusers-server-0.17-41.40.1 o samba-3.0.10-1.4E => samba-3.0.10-1.4E.2 o samba-client-3.0.10-1.4E => samba-client-3.0.10-1.4E.2 o samba-common-3.0.10-1.4E => samba-common-3.0.10-1.4E.2 o samba-swat-3.0.10-1.4E => samba-swat-3.0.10-1.4E.2 o selinux-policy-targeted-1.17.30-2.88 => selinux-policy-targeted-1.17.30-2.106 o selinux-policy-targeted-sources-1.17.30-2.88 => selinux-policy-targeted-sources-1.17.30-2.106 o setup-2.5.37-1.1 => setup-2.5.37-1.3 o shadow-utils-4.0.3-41.1 => shadow-utils-4.0.3-52.RHEL4 o slocate-2.7-12.RHEL4 => slocate-2.7-13.el4.6 o spamassassin-3.0.1-0.EL4 => spamassassin-3.0.4-1.el4 o squid-2.5.STABLE6-3.4E.5 => squid-2.5.STABLE6-3.4E.9 o squirrelmail-1.4.3a-9.EL4 => squirrelmail-1.4.3a-12.EL4 o strace-4.5.9-2.EL4 => strace-4.5.13-0.EL4.1 o subversion-1.1.1-2.1 => subversion-1.1.4-2.ent o subversion-devel-1.1.1-2.1 => subversion-devel-1.1.4-2.ent o subversion-perl-1.1.1-2.1 => subversion-perl-1.1.4-2.ent o sudo-1.6.7p5-30.1 => sudo-1.6.7p5-30.1.3 o sysreport-1.3.13-1 => sysreport-1.3.15-5 o system-config-lvm-0.9.24-1.0 => system-config-lvm-1.0.3-1.0 o system-config-netboot-0.1.8-1 => system-config-netboot-0.1.30-1_EL4 o system-config-printer-0.6.116-1 => system-config-printer-0.6.116.4-1 o system-config-printer-gui-0.6.116-1 => system-config-printer-gui-0.6.116.4-1 o system-config-securitylevel-1.4.19.1-1 => system-config-securitylevel-1.4.19.2-1 o system-config-securitylevel-tui-1.4.19.1-1 => system-config-securitylevel-tui-1.4.19.2-1 o system-config-soundcard-1.2.10-1 => system-config-soundcard-1.2.10-2.EL4 o tar-1.14-4 => tar-1.14-8.RHEL4 o tcpdump-3.8.2-9.RHEL4 => tcpdump-3.8.2-10.RHEL4 o telnet-0.17-31.EL4.2 => telnet-0.17-31.EL4.3 o telnet-server-0.17-31.EL4.2 => telnet-server-0.17-31.EL4.3 o thunderbird-1.0.2-1.4.1 => thunderbird-1.0.6-1.4.1 o ttfonts-bn-1.8-1 => ttfonts-bn-1.10-1.EL o ttfonts-gu-1.8-1 => ttfonts-gu-1.10-1.EL o ttfonts-hi-1.8-1 => ttfonts-hi-1.10-1.EL o ttfonts-pa-1.8-1 => ttfonts-pa-1.10-1.EL o ttfonts-ta-1.8-1 => ttfonts-ta-1.10-1.EL o ttmkfdir-3.0.9-14 => ttmkfdir-3.0.9-14.1.EL o tzdata-2005f-1.EL4 => tzdata-2005k-1.EL4 o udev-039-10.8.EL4 => udev-039-10.10.EL4 o unix2dos-2.2-24 => unix2dos-2.2-24.1 o up2date-4.4.5.6-2 => up2date-4.4.41-4 o up2date-gnome-4.4.5.6-2 => up2date-gnome-4.4.41-4 o urw-fonts-2.2-6 => urw-fonts-2.2-6.1 o util-linux-2.12a-16.EL4.6 => util-linux-2.12a-16.EL4.11 o vim-X11-6.3.046-0.40E.4 => vim-X11-6.3.046-0.40E.7 o vim-common-6.3.046-0.40E.4 => vim-common-6.3.046-0.40E.7 o vim-enhanced-6.3.046-0.40E.4 => vim-enhanced-6.3.046-0.40E.7 o vim-minimal-6.3.046-0.40E.4 => vim-minimal-6.3.046-0.40E.7 o vixie-cron-4.1-20_EL => vixie-cron-4.1-36.EL4 o vsftpd-2.0.1-5 => vsftpd-2.0.1-5.EL4.3 o vte-0.11.11-6 => vte-0.11.11-6.1.el4 o vte-devel-0.11.11-6 => vte-devel-0.11.11-6.1.el4 o xinetd-2.3.13-4 => xinetd-2.3.13-4.4E.1 o xorg-x11-6.8.2-1.EL.13.6 => xorg-x11-6.8.2-1.EL.13.15 o xorg-x11-Mesa-libGL-6.8.2-1.EL.13.6 => xorg-x11-Mesa-libGL-6.8.2-1.EL.13.15 o xorg-x11-Mesa-libGLU-6.8.2-1.EL.13.6 => xorg-x11-Mesa-libGLU-6.8.2-1.EL.13.15 o xorg-x11-Xdmx-6.8.2-1.EL.13.6 => xorg-x11-Xdmx-6.8.2-1.EL.13.15 o xorg-x11-Xnest-6.8.2-1.EL.13.6 => xorg-x11-Xnest-6.8.2-1.EL.13.15 o xorg-x11-Xvfb-6.8.2-1.EL.13.6 => xorg-x11-Xvfb-6.8.2-1.EL.13.15 o xorg-x11-deprecated-libs-6.8.2-1.EL.13.6 => xorg-x11-deprecated-libs-6.8.2-1.EL.13.15 o xorg-x11-deprecated-libs-devel-6.8.2-1.EL.13.6 => xorg-x11-deprecated-libs-devel-6.8.2-1.EL.13.15 o xorg-x11-devel-6.8.2-1.EL.13.6 => xorg-x11-devel-6.8.2-1.EL.13.15 o xorg-x11-doc-6.8.2-1.EL.13.6 => xorg-x11-doc-6.8.2-1.EL.13.15 o xorg-x11-font-utils-6.8.2-1.EL.13.6 => xorg-x11-font-utils-6.8.2-1.EL.13.15 o xorg-x11-libs-6.8.2-1.EL.13.6 => xorg-x11-libs-6.8.2-1.EL.13.15 o xorg-x11-sdk-6.8.2-1.EL.13.6 => xorg-x11-sdk-6.8.2-1.EL.13.15 o xorg-x11-tools-6.8.2-1.EL.13.6 => xorg-x11-tools-6.8.2-1.EL.13.15 o xorg-x11-twm-6.8.2-1.EL.13.6 => xorg-x11-twm-6.8.2-1.EL.13.15 o xorg-x11-xauth-6.8.2-1.EL.13.6 => xorg-x11-xauth-6.8.2-1.EL.13.15 o xorg-x11-xdm-6.8.2-1.EL.13.6 => xorg-x11-xdm-6.8.2-1.EL.13.15 o xorg-x11-xfs-6.8.2-1.EL.13.6 => xorg-x11-xfs-6.8.2-1.EL.13.15 o xpdf-3.00-11.5 => xpdf-3.00-11.8 o xscreensaver-4.18-5.rhel4.2 => xscreensaver-4.18-5.rhel4.9 o zlib-1.2.1.2-1 => zlib-1.2.1.2-1.2 o zlib-devel-1.2.1.2-1 => zlib-devel-1.2.1.2-1.2 o zsh-4.2.0-3 => zsh-4.2.0-3.EL.3 o zsh-html-4.2.0-3 => zsh-html-4.2.0-3.EL.3 The following new packages have been added to Scientific Linux 4.2: o OpenIPMI-1.4.14-1.4E.4 o OpenIPMI-devel-1.4.14-1.4E.4 o OpenIPMI-libs-1.4.14-1.4E.4 o OpenIPMI-tools-1.4.14-1.4E.4 o amtu-1.0.2-2.EL4 o audit-libs-1.0.3-4.EL4 o audit-libs-devel-1.0.3-4.EL4 o convmv-1.08-3.EL o device-mapper-multipath-0.4.5-5.2.RHEL4 o gamin-python-0.1.1-3.EL4 o gcc4-java-4.0.1-4.EL4.2 o iscsi-initiator-utils-4.0.3.0-2 o keyutils-0.3-1 o keyutils-devel-0.3-1 o libgcj4-4.0.1-4.EL4.2 o libgcj4-devel-4.0.1-4.EL4.2 o libgcj4-src-4.0.1-4.EL4.2 o lksctp-tools-1.0.2-6.4E.1 o lksctp-tools-devel-1.0.2-6.4E.1 o lksctp-tools-doc-1.0.2-6.4E.1 o systemtap-0.2.2-0.EL4.1 o tog-pegasus-2.4.1-2.rhel4 o tog-pegasus-devel-2.4.1-2.rhel4 The following packages have been removed from Scientific Linux 4.2: o No packages have been removed. ( x86 )