Scientific Linux Release 4.7 on i386 September 3, 2008 Items marked with a "*" indicate changes since 4.6 . It should be possible to upgrade from Scientific Linux 3.0.x via the anaconda installer. Yum is known to NOT work. *This includes Update 7 See SL.documentation for the vendor release notes. Send comments/issues/test reports to scientific-linux@fnal.gov -------------------------------------------------------------------------- Table of contents DOWNLOAD INFO ADDED compared to Enterprise 4 UPDATED compared to Enterprise 4 Installer/legal modifications ADDED by Upstream Vendor TECHNOLOGY PREVIEW by Upstream Vendor /contrib SRPMS HARDWARE REQUIREMENTS LIMITATIONS INFO ERRATA _____________________________________________________________________________ DOWNLOAD INFO _____________________________________________________________________________ http://ftp.scientificlinux.org/linux/scientific/47/i386 ftp://ftp.scientificlinux.org/linux/scientific/47/i386 http://ftp.scientificlinux.org/linux/scientific/47/iso/i386 ftp://ftp.scientificlinux.org/linux/scientific/47/iso/i386 ----------------------------------------------------------------------------- ADDED compared to vendor ----------------------------------------------------------------------------- *915resolution * * 915resolution is a tool to modify the video BIOS of the 800 and 900 * series Intel graphics chipsets. This includes the 845G, 855G, and * 865G chipsets, as well as 915G, 915GM, and 945G chipsets. This * modification is necessary to allow the display of certain graphics * resolutions for an Xorg or XFree86 graphics server. * 915resolution's modifications of the BIOS are transient. There is * no risk of permanent modification of the BIOS. This also means that * 915resolution must be run every time the computer boots inorder for * it's changes to take effect. * * 915resolution is derived from the tool 855resolution. However, the i * code differs substantially. 915resolution's code base is much simpler.i * 915resolution also allows the modification of bits per pixel. * * 915resolution-0.5.3-5.sl4.i386.rpm *alpine Alpine is a tool for reading, sending, and managing electronic messages. Alpine is the successor to Pine and was developed by Computing & Communications at the University of Washington. * alpine-1.10-1.i386.rpm apt apt-0.5.15cnc6-9.SL.i386.rpm apt-devel-0.5.15cnc6-9.SL.i386.rpm * apt-sourceslist-47-1.SL.i386.rpm apt-autoupdate-1-5.SL.noarch.rpm apt-firstboot-1-5.SL.noarch.rpm apt-scripts-1-5.SL.noarch.rpm cfitsio CFITSIO is a library of C and FORTRAN subroutines for reading and writing data files in FITS (Flexible Image Transport System) data format CFITSIO is widely used in the astronomical community. cfitsio-3.006-3.i386.rpm cfitsio-devel-3.006-3.i386.rpm Cluster Suite & GFS A bug fix required a minor change to the cman/sm message formats between SL 4.1 and SL 4.2 that make the two versions incompatible, so all nodes need to be running the SL 4.2 version. In other words: If you have to upgrade from SL 4.0 and 4.1, you have to updated your whole cluster at once. ccs-1.0.11-1.i686.rpm ccs-devel-1.0.11-1.i686.rpm cluster-cim-0.11.0-3.i386.rpm cluster-snmp-0.11.0-3.i386.rpm cman-1.0.17-0.el4_6.3.i686.rpm cman-devel-1.0.17-0.el4_6.3.i686.rpm cman-kernel-2.6.9-53.8.i686.rpm cman-kernel-hugemem-2.6.9-53.8.i686.rpm cman-kernel-smp-2.6.9-53.8.i686.rpm cman-kernel-xenU-2.6.9-53.8.i686.rpm cman-kernheaders-2.6.9-53.8.i686.rpm cmirror-1.0.1-1.i386.rpm cmirror-kernel-2.6.9-38.7.i686.rpm cmirror-kernel-hugemem-2.6.9-38.7.i686.rpm cmirror-kernel-smp-2.6.9-38.7.i686.rpm cmirror-kernel-xenU-2.6.9-38.7.i686.rpm dlm-1.0.7-1.i686.rpm dlm-devel-1.0.7-1.i686.rpm dlm-kernel-2.6.9-52.4.i686.rpm dlm-kernel-hugemem-2.6.9-52.4.i686.rpm dlm-kernel-smp-2.6.9-52.4.i686.rpm dlm-kernel-xenU-2.6.9-52.4.i686.rpm dlm-kernheaders-2.6.9-52.4.i686.rpm fence-1.32.50-2.el4_6.1.i686.rpm GFS-6.1.15-1.i386.rpm GFS-kernel-2.6.9-75.11.i686.rpm GFS-kernel-hugemem-2.6.9-75.11.i686.rpm GFS-kernel-smp-2.6.9-75.11.i686.rpm GFS-kernel-xenU-2.6.9-75.11.i686.rpm GFS-kernheaders-2.6.9-75.11.i686.rpm gnbd-1.0.9-1.i686.rpm gnbd-kernel-2.6.9-10.31.i686.rpm gnbd-kernel-hugemem-2.6.9-10.31.i686.rpm gnbd-kernel-smp-2.6.9-10.31.i686.rpm gnbd-kernel-xenU-2.6.9-10.31.i686.rpm gnbd-kernheaders-2.6.9-10.31.i686.rpm gulm-1.0.10-0.i686.rpm gulm-devel-1.0.10-0.i686.rpm iddev-2.0.0-4.i686.rpm iddev-devel-2.0.0-4.i686.rpm luci-0.11.0-3.el4.i386.rpm lvm2-cluster-2.02.27-2.el4_6.2.i386.rpm magma-1.0.8-1.i686.rpm magma-devel-1.0.8-1.i686.rpm magma-plugins-1.0.12-0.i386.rpm modcluster-0.11.0-3.i386.rpm perl-Net-Telnet-3.03-3.noarch.rpm piranha-0.8.2-1.i386.rpm rgmanager-1.9.72-1.i386.rpm ricci-0.11.0-3.el4.i386.rpm system-config-cluster-1.0.51-2.0.el4_6.1.noarch.rpm dropit dropit's intended purpose is to remove directories entries from a PATH shell variable value, which has colon separated fields. dropit is usable in sh, ksh, and csh shell script files. dropit-1.2-1.i386.rpm *FUSE With FUSE it is possible to implement a fully functional filesystem in a userspace program. fuse-smb: you can seamlessly browse your network neighbourhood as if it were on your own filesystem. Only when you're accessing a share is a connection made to the remote computer. This also allows users to mount smb shares using kerberos. fuse-sshfs: A FUSE-filesystem client based on the SSH File Transfer Protocol. On the client side mounting the filesystem is as easy as logging into the server with ssh. * fuse-2.7.3-1.SL.i386.rpm * fuse-devel-2.7.3-1.SL.i386.rpm * fuse-libs-2.7.3-1.SL.i386.rpm * fuse-smb-0.8.7-1.i386.rpm * fuse-sshfs-2.1-1.SL.i386.rpm * kernel-module-fuse-2.6.9-78.0.1.EL-2.7.3-1.SL.i686.rpm * kernel-module-fuse-2.6.9-78.0.1.ELhugemem-2.7.3-1.SL.i686.rpm * kernel-module-fuse-2.6.9-78.0.1.ELsmp-2.7.3-1.SL.i386.rpm * kernel-module-fuse-2.6.9-78.0.1.ELsmp-2.7.3-1.SL.i686.rpm * kernel-module-fuse-2.6.9-78.0.1.ELxenU-2.7.3-1.SL.i686.rpm *icewm A lightweight window manager for the X Window System. * icewm-1.2.35-1.i386.rpm * icewm-l10n-1.2.35-1.i386.rpm Intel wireless firmware Firmware for the Intel® PRO/Wireless 2100 and 2200 Driver. Please read the license that comes in the rpm carefully. ipw2200-firmware-2.4 includes both version 2.4.xx and 2.2.xx This is needed because newer kernels have a newer driver that needs the newer firmware. Older kernels, with older drivers, need the 2.2 firmware version. ipw2100-firmware-1.3-5.noarch.rpm ipw2200-firmware-3.0-1.noarch.rpm ipw3945d is needed to control the ipw3945 wireless card kernel-module-ipw3945 is needed because this driver is not in the standard kernel. Note that the installer does NOT know how to enable the 3945 wireless. You will have to add the starting of the /sbin/ipw3945d in your startup scripts. This driver is known to work on the Dell 820 and Dell 620. It is known to NOT work on the FJS S7110 (Fujitsu). ipw3945-firmware-1.13-2.noarch.rpm ipw3945d-1.7.18-1.i386.rpm * kernel-module-ipw3945-2.6.9-78.0.1.EL-1.1.0-1.SL4.i686.rpm * kernel-module-ipw3945-2.6.9-78.0.1.ELhugemem-1.1.0-1.SL4.i686.rpm * kernel-module-ipw3945-2.6.9-78.0.1.ELsmp-1.1.0-1.SL4.i686.rpm * kernel-module-ipw3945-2.6.9-78.0.1.ELxenU-1.1.0-1.SL4.i686.rpm JAVA * java-1.5.0-sun-compat-1.5.0.16-1.1.sl.jpp.noarch.rpm This package provides JPackage compatibility symlinks and directories for Sun's JDK rpm. * jdk-1.5.0_16-fcs.i586.rpm This packages is the java sdk from sun. It's license is found at misc/licenses/j2sdk-1.4.2-x.license To have all of it's links (including plugins) setup correctly you should also install java-1.5.0-sun-compat So the easiest thing to do is yum install java-1.5.0-sun-compat as it will automatically pull in the current jdk-1.5.0 rpm. There is no gpg signature on this rpm. Putting one would violate the user license. It also does not load if one is put on. ksh From ATT. Same version as one in SL30x. ksh93-2000.10.31.0-1.i386.rpm *madwifi Support for Atheros G wireless madfifi is the Multiband Atheros Driver for WiFi, a linux device driver for 802.11a/b/g universal NIC cards - either Cardbus, PCI or MiniPCI - that use Atheros chipsets (ar5210, ar5211, ar5212). * madwifi-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-2.6.9-78.0.1.EL-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-2.6.9-78.0.1.ELhugemem-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-2.6.9-78.0.1.ELsmp-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-hal-2.6.9-78.0.1.EL-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-hal-2.6.9-78.0.1.ELhugemem-0.9.4-10.sl4.i686.rpm * kernel-module-madwifi-hal-2.6.9-78.0.1.ELsmp-0.9.4-10.sl4.i686.rpm multimedia Updated to latest version gstreamer-plugins-mp3-0.8.5-1.SL4x.i386.rpm from livna Repository k3b-mp3-0.11.24-2.SL4x.i386.rpm from livna Repository mpg321-0.2.10-5.SL.i386.rpm from Dag's Repository xmms-mp3-1.2.10-11.1.SL.i386.rpm from Dag's Repository These are dependencies of the above rpms. lame-3.96.1-4.SL4x.i386.rpm from Dag's Repository lame-devel-3.96.1-4.SL4x.i386.rpm from Dag's Repository libid3tag-0.15.1b-3.SL.i386.rpm from Dag's Repository libid3tag-devel-0.15.1b-3.SL.i386.rpm from Dag's Repository libmad-0.15.1b-3.SL.i386.rpm from Dag's Repository libmad-devel-0.15.1b-3.SL.i386.rpm from Dag's Repository ndiswrapper The ndiswrapper project makes it possible to use WLAN-Hardware with Linux by means of a loadable kernel module that "wraps around" NDIS (Windows network driver API) drivers. These rpms contain just the kernel module and loader. You will also need the Windows driver for your card. The installer does NOT install ndiswrapper, you have to install it by either selecting it on the Packages Install page during the install or adding later via yum or apt. WARNING: Scientific Linux-Kernels use 4K size stack. Many Windows drivers will need at least 8K size stacks. For details read the wiki on: http:/ndiswrapper.sourceforge.net ndiswrapper-1.41-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.9-78.0.1.EL-1.41-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.9-78.0.1.ELhugemem-1.41-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.9-78.0.1.ELsmp-1.41-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.9-78.0.1.ELxenU-1.41-1.SL.i686.rpm NumPy http://numpy.scipy.org// NumPy derives from the old Numeric code base and can be used as a replacement for Numeric. It also adds the features introduced by Numarray and can also be used to replace Numarray. This package contains: - a powerful N-dimensional array object - sophisticated (broadcasting) functions - basic linear algebra functions - basic Fourier transforms - sophisticated random number capabilities - tools for integrating Fortran code. numpy-1.0.4-1.i386.rpm *OpenAFS We have put in the new stable branch of openafs, version 1.4.6 new optional packages openafs-authlibs and openafs-authlibs-devel with shared versions of the afsauthent and afsrpc libraries (using a patch from Russ Allbery to correct the sonames) man pages for many commands are now included, preferring those prepared by Alf Wachsmann and Elizabeth Cassell where available * Upgrade to newer version * openafs-1.4.7-68.SL4.i386.rpm * openafs-authlibs-1.4.7-68.SL4.i386.rpm * openafs-authlibs-devel-1.4.7-68.SL4.i386.rpm * openafs-client-1.4.7-68.SL4.i386.rpm * openafs-compat-1.4.7-68.SL4.i386.rpm * openafs-debug-1.4.7-68.SL4.i386.rpm * openafs-devel-1.4.7-68.SL4.i386.rpm * openafs-kernel-source-1.4.7-68.SL4.i386.rpm * openafs-kpasswd-1.4.7-68.SL4.i386.rpm * openafs-krb5-1.4.7-68.SL4.i386.rpm * openafs-server-1.4.7-68.SL4.i386.rpm * kernel-module-openafs-2.6.9-78.0.1.EL-1.4.7-68.SL4.i686.rpm * kernel-module-openafs-2.6.9-78.0.1.ELhugemem-1.4.7-68.SL4.i686.rpm * kernel-module-openafs-2.6.9-78.0.1.ELsmp-1.4.7-68.SL4.i686.rpm * kernel-module-openafs-2.6.9-78.0.1.ELxenU-1.4.7-68.SL4.i686.rpm Performance Co-Pilot (PCP) Performance Co-Pilot (PCP) is a framework and services to support system-level performance monitoring and performance management. Not installed by default. pcp-2.4.0-1.1.i386.rpm These perl modules have been added as they are useful. They came from CERN perl-BSD-Resource-1.24-1.i386.rpm perl-Compress-Zlib-1.16-12.i386.rpm perl-MailTools-1.62-1.noarch.rpm perl-Parse-RecDescent-1.94-1.noarch.rpm perl-Proc-ProcessTable-0.39-1.i386.rpm perl-SQL-Statement-1.06-1.noarch.rpm perl-TermReadKey-2.20-12.i386.rpm perl-Text-CSV_XS-0.23-1.i386.rpm perl-Text-Template-1.44-1.noarch.rpm perl-Tk-804.027-1.i386.rpm *R http://www.r-project.org/ R is a language and environment for statistical computing and graphics. It is a GNU project which is similar to the S language and environment which was developed at Bell Laboratories by John Chambers and colleagues. R can be considered as a different implementation of S. There are some important differences, but much code written for S runs unaltered under R. * R-2.7.1-2.sl4.i386.rpm * R-devel-2.7.1-2.sl4.i386.rpm * libRmath-2.7.1-2.sl4.i386.rpm * libRmath-devel-2.7.1-2.sl4.i386.rpm r1000 This is the Linux device driver released for RealTek Ethernet controllers, which are listed as following. 1. RTL8169S/SB/SC (Gigabit Ethernet with PCI interface) 2. RTL8168B (Gigabit Ethernet with PCI-Express interface) 3. RTL8101E (Fast Ethernet with PCI-Express interface) These are not installed by the installer. You must install them either by selecting them during the install or later with yum or apt. r1000-2.2-1.SL4x.i686.rpm * kernel-module-r1000-2.6.9-78.0.1.EL-2.2-2.SL4x.i686.rpm * kernel-module-r1000-2.6.9-78.0.1.ELhugemem-2.2-2.SL4x.i686.rpm * kernel-module-r1000-2.6.9-78.0.1.ELsmp-2.2-2.SL4x.i686.rpm * kernel-module-r1000-2.6.9-78.0.1.ELxenU-2.2-2.SL4x.i686.rpm SL_afs_no_dynroot-2.0-1.noarch.rpm This package removes the -dynroot option from the openafs config Restarting of afs is needed for this to take effect. This rpm does not restart afs SL_desktop_tweaks-2.0-4.noarch.rpm This adds a terminal icon to the kicker panel for both KDE and GNOME. This also enables 'Last Session' in gdm login screen. Installed by default for both KDE and GNOME. SL_disable_print_notification-1.0-4.noarch.rpm Removes eggcups notification. Not installed by default. SL_enable_serialconsole-3.1-4.noarch.rpm This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows users to login at this prompt. Update to include a missing dependency. SL_enable_slocate_cron-1.0-1.noarch.rpm By default slocate does not run daily, it is turned off in it's config file. This turns it on when the rpm is added, and turns it back off when the rpm is removed. SL_firefox_parentlock_fix-1.0-10.noarch.rpm When a users home area is in AFS space, it is possible for firefox, thunderbird, and/or seamonkey to leave a lock file called .parentlock when they are closed. The user is then not able to restart firefox, thunderbird, and/or seamonkey until that lock file is removed. This puts in a startup script that removes the .parentlock lock file. SL_inittab_change-1.0-6.noarch.rpm Changes /etc/inittab to require the root password for single user mode. Not installed by default. SL_libg2c.a_change-3.4.3-1.noarch.rpm Creates a missing symbolic link in the gcc-g77 package from /usr/lib/libg2c.a to it's proper place Installed with gcc-g77. SL_no_colorls-1.0-2.noarch.rpm Turns off "color" of ls. Not installed by default. SL_pc_speaker-1.0-1.noarch.rpm This package changes the rc.sysinit boot script so that the pcspkr kernel module is loaded at an early stage. This will allow the PC speaker to beep again. SL_rpm_show_arch-1.0-1.noarch.rpm Adds arch to "rpm -qa" listing. SL_sendmail_accept-1.1-3.noarch.rpm Changes Sendmail config so that it allows incomming mail. Not installed by default. Changed to not obsolete the older zz_sendmail_accept which is not needed any more tidy When editing HTML it's easy to make mistakes. Wouldn't it be nice if there was a simple way to fix these mistakes automatically and tidy up sloppy editing into nicely formated markup? Dave Raggett's HTML TIDY is a free utility for doing just that. It also works great on the atrociously hard to read markup generated by specialized HTML editors and conversion tools, and can help you identify where you need to pay further attention on making your i pages more accessible to people with disabilities. tidy-2005.9.21-2.sl4.i386.rpm tidy-devel-2005.9.21-2.sl4.i386.rpm yum NOTE: That just because a yum repository exists does NOT mean it is SL 4.4 compatible with all other SL 4.4 yum repositories. Use of other "packages" such as "smart" may cause the rpm database to be not compatible with yum. createrepo is used to create yum repositories on the server for yum 2.1 and above, and possibly future versions of apt. yum-conf has the check for a running yum in it, so that if yum has been running for a long time, when the yum.cron starts up, it will kill the old yum. This was changed because we had reports that yum was "hanging". yum-conf-4.1-4.SL has atrpms, dag, and dries repo's in it, but they are not enabled by default. To enable them for one time use, use the --enablerepo command, such as yum --enablerepo=atrpms list madwifi yum --enablerepo=dag install mplayer If you want the repositories to be enabled all the time then you need to edit the config files and change enabled=0 to enabled=1. The config files are /etc/yum.repos.d/atrpms.repo /etc/yum.repos.d/dag.repo /etc/yum.repos.d/dries.repo Yum version 2.4 and above has the kernel-module plugin that let's yum understand how kernel-module rpm's are related to kernels. Because of this updates dealing with kernel-module rpm's (such as afs) now work python-elementtree, python-sqlite, sqlite, and urlgrabber are all needed for yum 2.4 and above. New for yum-conf-4.3: a sl-testing area (not on by default) and yum.cron now checks to see how long the machine is been up If it is up less than 20 hours, it doesn't wait, but does the update This uptime check was done to help laptops and other machines that might not be on long enough to wait for the random time. metadata_expire variable was set to 20 hours to allow for normal users to be able to use yum for those commands they can run There is a fastbug repo area to correspond to the vendors fasttrack This is not on by default. yum-conf-4x was created for those users who want to be at the latest stable release. It is always pointing at the 4x area. This means that when we make new versions you will automatically be upgraded to them. We have changed flash.repo to be adobe.repo adobe.repo now points to the repository at linuxdownload.adobe.com yum-2.4.3-2.SL.noarch.rpm * yum-conf-47-1.SL.noarch.rpm yum-conf-4x-1-7.SL.noarch.rpm createrepo-0.4.4-1.noarch.rpm python-elementtree-1.2.6-4.i386.rpm python-sqlite-1.1.6-1.i386.rpm sqlite-3.1.2-3.i386.rpm sqlite-devel-3.1.2-3.i386.rpm urlgrabber-2.9.6-1.noarch.rpm Yumex is a graphical user interface for yum. Yumex-applet replaces rhn-applet, and users yumex instead of up2date Yumex 0.43 and above support plugins yumex-1.0.2-1.0.noarch.rpm yumex-applet-2.1-2.i386.rpm yum-utils is a collection of utilities and examples for the yum package manager. It includes utilities by different authors that make yum easier and more powerful to use. Some utilities are plugin's. yum-utils-0.6-1.SL.noarch.rpm yum-changelog-0.6-1.SL.noarch.rpm yum-downloadonly-0.6-1.SL.noarch.rpm yum-fastestmirror-0.6-1.SL.noarch.rpm yum-installonlyn-0.6-1.SL.noarch.rpm yum-protectbase-0.6-1.SL.noarch.rpm yum-tsflags-0.6-1.SL.noarch.rpm yum-updateonboot-0.6-1.SL.noarch.rpm yum-versionlock-0.6-1.SL.noarch.rpm MISC Added these rpms because they are important but upstream vendor did not include them. * pine was replaced by alpine gv-3.5.8-29.i386.rpm from Fedora Core 3 jpilot-0.99.8-7.1.i386.rpm from Scientific Linux 5.x ncurses4-5.0-12.i386.rpm from Scientific Linux 3.0.x readline41-4.1-17.i386.rpm from Scientific Linux 3.0.x Documentation rhd-dg-en-4-2.SL1.noarch.rpmi Desktop Deployment Guide rhel-ig-x8664-multi-en-4-3.SL1.noarch.rpm Installation Guide rhel-isa-en-4-3.SL1.noarch.rpm Intro System Admin Guide rhel-rg-en-4-3.SL1.noarch.rpm Reference Guide rhel-sag-en-4-3.SL1.noarch.rpm System Administrator Guide rhel-sbs-en-4-1.SL1.noarch.rpm Step-by-Step Guide rhel-selg-en-4-1.SL1.noarch.rpm SElinux Guide rhel-sg-en-4-3.SL1.noarch.rpm Security Guide rh-glossary-en-2-1.SL1.noarch.rpm Glossary ------------------------------------------------------------------------- UPDATED compared to vendor ------------------------------------------------------------------------- anaconda Added support for sites Added support for openafs on smp Added support for openafs on xen Updated icons * Updated to Update 7 * anaconda-10.1.1.91-1SL.i386.rpm anaconda-help-10.0.5-1SL1.noarch.rpm * anaconda-runtime-10.1.1.91-1SL.i386.rpm Vendor "logo" and other required changes There are minimal changes compared to the "vendor" release. We have changed the "rpms" that are required to be changed. These changes are defined by the "vendor". sl-release has been determined to be the place to change several global properties. This is how fedora does it. sl-release changes the default mozilla and firefox bookmarks. sl-release changes the default up2date configuration to use yum and points this configuration to ftp.scientificlinux.org Fixes /etc/redhat-release containing "Release" vs "release" Includes SL.releasenote Changes grub to put in the new release name for the default kernel indexhtml-4.1-1.SL.1.noarch.rpm redhat-artwork-0.120.1-1.2SL.2.i386.rpm redhat-logos-1.1.25-1.SL.8.noarch.rpm * sl-release-4.7-1.noarch.rpm These rpm's are not required to be changed by the vendor, we removed some vendor references customizations desktop-backgrounds-basic-2.0-26.2.3SL.noarch.rpm desktop-backgrounds-extra-2.0-26.2.3SL.noarch.rpm *comps-47-0.*.i386.rpm * The comps.xml file got a update with SL 4.7. * All groups are now alphabetical * Groups that are completely commented out have been removed. * Where available, I have updated the international group name and * description to be the same as Update 7 * Except for where I have specifically added or removed a package * or default setting, I have updated the groups to be the same as Update 7 * Most changes were minor, but the following were noteworthy * - audit is now optional in the core group * - development-tools now includes the group emacs and xemacs RPM which contains the comps.xml file used during the install. Needed by Rocks. glade2-2.6.0-1.SL4.i386.rpm glade2 has an bug so that all you got was a blank window when it started. This was an infinate loop bug, which was fixed. Apache Changed index.html to not have Upstream Vendor info but to have SL info. * httpd-2.0.52-41.sl4.i386.rpm * httpd-devel-2.0.52-41.sl4.i386.rpm * httpd-manual-2.0.52-41.sl4.i386.rpm * httpd-suexec-2.0.52-41.sl4.i386.rpm * mod_ssl-2.0.52-41.sl4.i386.rpm ------------------------------------------------------------------------- ADDED BY UPSTREAM VENDOR ------------------------------------------------------------------------- Added as part of Update 5 dapl-1.2.1-7.i386.rpm dapl-devel-1.2.1-7.i386.rpm ibutils-1.0-4.i386.rpm dmraid-1.0.0.rc14-5_RHEL4_U5.i386.rpm dmraid-devel-1.0.0.rc14-5_RHEL4_U5.i386.rpm ibutils-devel-1.0-4.i386.rpm ibutils-libs-1.0-4.i386.rpm kernel-xenU-2.6.9-55.EL.i686.rpm kernel-xenU-devel-2.6.9-55.EL.i686.rpm lam-7.1.2-8.i386.rpm lam-devel-7.1.2-8.i386.rpm lam-libs-7.1.2-8.i386.rpm libacl-devel-2.2.23-5.3.el4.i386.rpm libibcm-0.9.1-7.i386.rpm libibcm-devel-0.9.1-7.i386.rpm libibcommon-1.0.1-7.i386.rpm libibcommon-devel-1.0.1-7.i386.rpm libibmad-1.0.1-7.i386.rpm libibmad-devel-1.0.1-7.i386.rpm libibumad-1.0.1-7.i386.rpm libibumad-devel-1.0.1-7.i386.rpm libibverbs-1.0.4-7.i386.rpm libibverbs-devel-1.0.4-7.i386.rpm libibverbs-utils-1.0.4-7.i386.rpm libmthca-1.0.3.1-7.i386.rpm libmthca-devel-1.0.3.1-7.i386.rpm librdmacm-devel-0.9.1-7.i386.rpm librdmacm-utils-0.9.1-7.i386.rpm libsdp-1.1.0-7.i386.rpm numactl-0.6.4-1.39.i386.rpm openib-1.1-7.i386.rpm openib-mstflint-1.0.1-7.i386.rpm openib-perftest-1.0.1-7.i386.rpm openib-srptools-0.0.5-7.i386.rpm openib-tvflash-0.9.1-7.i386.rpm openmpi-1.1.1-8.i386.rpm openmpi-devel-1.1.1-8.i386.rpm openmpi-libs-1.1.1-8.i386.rpm opensm-2.0.0-7.i386.rpm opensm-devel-2.0.0-7.i386.rpm opensm-libs-2.0.0-7.i386.rpm pam_ccreds-3-3.rhel4.2.i386.rpm setools-devel-2.3-4.i386.rpm sg3_utils-devel-1.22-3.1.i386.rpm sg3_utils-libs-1.22-3.1.i386.rpm sysfsutils-1.2.0-1.i386.rpm systemtap-runtime-0.5.12-1.i386.rpm wpa_supplicant-0.4.9-1.1.el4.i386.rpm Added as part of Update 4 dapl-1.2.0-1.i386.rpm dapl-devel-1.2.0-1.i386.rpm dmraid-devel-1.0.0.rc11-3_RHEL4_U4.i386.rpm ibmasm-3.0-7.i386.rpm kernel-ib-1.0-1.i386.rpm libgomp-4.1.0-18.EL4.i386.rpm libgssapi-0.8-1.i386.rpm libgssapi-devel-0.8-1.i386.rpm libibcm-0.9.0-1.i386.rpm libibcommon-1.0-1.i386.rpm libibcommon-devel-1.0-1.i386.rpm libibmad-1.0-1.i386.rpm libibmad-devel-1.0-1.i386.rpm libibumad-1.0-1.i386.rpm libibumad-devel-1.0-1.i386.rpm librdmacm-0.9.0-1.i386.rpm mstflint-1.0-1.i386.rpm nfs-utils-lib-1.0.6-3.i386.rpm nfs-utils-lib-devel-1.0.6-3.i386.rpm oddjob-0.26-1.1.i386.rpm oddjob-devel-0.26-1.1.i386.rpm oddjob-libs-0.26-1.1.i386.rpm openib-diags-1.0-1.i386.rpm perftest-1.0-1.i386.rpm sblim-cmpi-base-1.5.4-12.EL4.i386.rpm sblim-cmpi-base-devel-1.5.4-12.EL4.i386.rpm sblim-cmpi-base-test-1.5.4-12.EL4.i386.rpm sblim-cmpi-devel-1.0.4-12.EL4.i386.rpm sblim-cmpi-fsvol-1.4.3-12.EL4.i386.rpm sblim-cmpi-fsvol-devel-1.4.3-12.EL4.i386.rpm sblim-cmpi-fsvol-test-1.4.3-12.EL4.i386.rpm sblim-cmpi-network-1.3.7-12.EL4.i386.rpm sblim-cmpi-network-devel-1.3.7-12.EL4.i386.rpm sblim-cmpi-network-test-1.3.7-12.EL4.i386.rpm sblim-cmpi-nfsv3-1.0.13-12.EL4.i386.rpm sblim-cmpi-nfsv3-test-1.0.13-12.EL4.i386.rpm sblim-cmpi-nfsv4-1.0.11-12.EL4.i386.rpm sblim-cmpi-nfsv4-test-1.0.11-12.EL4.i386.rpm sblim-cmpi-params-1.2.4-12.EL4.i386.rpm sblim-cmpi-params-test-1.2.4-12.EL4.i386.rpm sblim-cmpi-sysfs-1.1.8-12.EL4.i386.rpm sblim-cmpi-sysfs-test-1.1.8-12.EL4.i386.rpm sblim-cmpi-syslog-0.7.9-12.EL4.i386.rpm sblim-cmpi-syslog-test-0.7.9-12.EL4.i386.rpm sblim-gather-2.1.1-12.EL4.i386.rpm sblim-gather-devel-2.1.1-12.EL4.i386.rpm sblim-gather-provider-2.1.1-12.EL4.i386.rpm sblim-gather-test-2.1.1-12.EL4.i386.rpm sblim-testsuite-1.2.4-12.EL4.i386.rpm sblim-wbemcli-1.5.1-12.EL4.i386.rpm srptools-0.0.4-1.i386.rpm tog-pegasus-test-2.5.1-2.EL4.i386.rpm tvflash-0.9.0-1.i386.rpm Added as part of Update 3 frysk-0.0.1.2006.02.19.rh1-0.EL4.1.i386.rpm keyutils-1.0-2.i386.rpm keyutils-devel-1.0-2.i386.rpm keyutils-libs-1.0-2.i386.rpm libibverbs-1.0.rc4-0.4265.2.EL4.i386.rpm libibverbs-devel-1.0.rc4-0.4265.2.EL4.i386.rpm libibverbs-utils-1.0.rc4-0.4265.2.EL4.i386.rpm libmthca-1.0.rc4-0.4265.2.EL4.i386.rpm libmthca-devel-1.0.rc4-0.4265.2.EL4.i386.rpm libsdp-0.90-0.4265.2.EL4.i386.rpm opensm-1.0-0.4265.2.EL4.i386.rpm opensm-devel-1.0-0.4265.2.EL4.i386.rpm opensm-libs-1.0-0.4265.2.EL4.i386.rpm rarpd-ss981107-18.40.2.i386.rpm udapl-1.2-0.4265.2.EL4.i386.rpm udapl-devel-1.2-0.4265.2.EL4.i386.rpm Added as part of Update 2 audit-libs-1.0.3-6.EL4.i386.rpm audit-libs-devel-1.0.3-6.EL4.i386.rpm amtu-1.0.2-2.EL4.i386.rpm convmv-1.08-3.EL.noarch.rpm device-mapper-multipath-0.4.5-6.0.RHEL4.i386.rpm gamin-python-0.1.1-3.EL4.i386.rpm iscsi-initiator-utils-4.0.3.0-2.i386.rpm keyutils-0.3-1.i386.rpm keyutils-devel-0.3-1.i386.rpm lksctp-tools-1.0.2-6.4E.1.i386.rpm lksctp-tools-devel-1.0.2-6.4E.1.i386.rpm lksctp-tools-doc-1.0.2-6.4E.1.i386.rpm OpenIPMI-1.4.14-1.4E.7.i386.rpm OpenIPMI-devel-1.4.14-1.4E.7.i386.rpm OpenIPMI-libs-1.4.14-1.4E.7.i386.rpm OpenIPMI-tools-1.4.14-1.4E.7.i386.rpm systemtap-0.4-0.EL4.i386.rpm tog-pegasus-2.4.1-4.4.rhel4.i386.rpm tog-pegasus-devel-2.4.1-4.4.rhel4.i386.rpm gcc4-java-4.0.1-4.EL4.2.i386.rpm libgcj4-4.0.1-4.EL4.2.i386.rpm libgcj4-devel-4.0.1-4.EL4.2.i386.rpm libgcj4-src-4.0.1-4.EL4.2.i386.rpm ----------------------------------------------------------------------------- TECHNOLOGY PREVIEW by vendor ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- /contrib ----------------------------------------------------------------------------- RPMS provided by colaboraters that either cannot go in main release or are intesting before going into main release. /contrib/RPMS/ /contrib/SRPMS/ ----------------------------------------------------------------------------- /errata/ ----------------------------------------------------------------------------- SL/RPMS/ Security errata fastbugs/RPMS/ Packages rebuilt from the Upstream Vendor Fastrack rpms These are rpms that are expected to be in the next Update They have gone through full QA by the Upstream Vendor bugfix45/RPMS/ Reserved for packages from the next Update. obsolete/RPMS/ Packages that used to be in the release but have been updated --------------------------------------------------------------------------- /../SRPMS/ --------------------------------------------------------------------------- / Contains the SRPMS for what we added or changed. Put these in the top level directory as these are really the ones we changed. All the others can be obtained from the upstream vendor ftp updates area /vendor/ /errata SRPMS from vendor for errata. /original SRPMS from vendor for originally released Enterpise 4 . sites//SRPMS SRPMS for site if there is a site ----------------------------------------------------------------------------- LIMITATIONS ----------------------------------------------------------------------------- Virtulization Scientific Linux 4.5 can *not* be a xen host, only a guest. Scientific Linux 4.5 and above have a xen kernel. This allows them to be installed as a xen paravirtulizaed guest. Follow the Virtual Host's instructions for installing a paravirtulizaed guest, to install Scientific Linux 4.5 as a xen guest. Paravirtualizaed guests on Scientific Linux 5.0 This is a limitation of Scientific Linux 5.0, but affects installing Scientific Linux 4.5 as a paravirtulized guest. These limitations will hopefully be fixed in Scientific Linux 5.1 or 5.2 - 32 bit (i386) paravirtualized guests cannot run on a 64 bit (x86_64) host (dom0). It will fail. - 64 bit (x86_64) paravirtualized guests cannot run on a 32 bit (i386) host (dom0). It will fail. Fully Virtualizaed guests on Scientific Linux 5.0 This is a limitation of Scientific Linux 5.0, but affects installing Scientific Linux 4.5 as a fully virtulized guest. - 64 bit fully-virtulizaed guests cannot run on a 32 bit (i386) host (dom0). It will fail. system-config-packages add,remove packages This does NOT work use yum instead. up2date up2date is not supported in Scientific Linux. Please use yum instead. ipw3945 Does not work in the installer and does not work on some laptops. 3ware 8xxx and 9xxx in same system Grub can get confused about which "drives" are which if both of these cards are installed. You can either run grub manually before rebooting or use "noprobe" during the install and install only the 3ware driver for the card that you will be booting off of. ----------------------------------------------------------------------------- INFO ----------------------------------------------------------------------------- Web Site https://www.scientificlinux.org FTP ftp://ftp.scientificlinux.org/linux/scientific/40rolling/ Mailing Lists scientific-linux-devel@fnal.gov Development of Scientific Linux scientific-linux-users@fnal.gov Users of Scientific Linux supporting each other scientific-linux-announce@fnal.gov Announcements concerning Scientific Linux scientific-linux-errata@fnal.gov Announcements about Security Errata ------------------------------------------------------------------------- ERRATA rebuilt from SRPMS ------------------------------------------------------------------------- * htdig-3.2.0b6-6.el4_7.i386.rpm * htdig-web-3.2.0b6-6.el4_7.i386.rpm * libxslt-1.1.11-1.el4_7.2.i386.rpm * libxslt-devel-1.1.11-1.el4_7.2.i386.rpm * libxslt-python-1.1.11-1.el4_7.2.i386.rpm * nss_ldap-253-5.sl4.1.i386.rpm * cman-kernel-2.6.9-55.13.el4_7.1.i686.rpm * cman-kernel-hugemem-2.6.9-55.13.el4_7.1.i686.rpm * cman-kernel-smp-2.6.9-55.13.el4_7.1.i686.rpm * cman-kernel-xenU-2.6.9-55.13.el4_7.1.i686.rpm * cman-kernheaders-2.6.9-55.13.el4_7.1.i686.rpm * cmirror-kernel-2.6.9-43.4.el4_7.1.i686.rpm * cmirror-kernel-hugemem-2.6.9-43.4.el4_7.1.i686.rpm * cmirror-kernel-smp-2.6.9-43.4.el4_7.1.i686.rpm * cmirror-kernel-xenU-2.6.9-43.4.el4_7.1.i686.rpm * dlm-kernel-2.6.9-54.11.el4_7.1.i686.rpm * dlm-kernel-hugemem-2.6.9-54.11.el4_7.1.i686.rpm * dlm-kernel-smp-2.6.9-54.11.el4_7.1.i686.rpm * dlm-kernel-xenU-2.6.9-54.11.el4_7.1.i686.rpm * dlm-kernheaders-2.6.9-54.11.el4_7.1.i686.rpm * GFS-kernel-2.6.9-80.9.el4_7.1.i686.rpm * GFS-kernel-hugemem-2.6.9-80.9.el4_7.1.i686.rpm * GFS-kernel-smp-2.6.9-80.9.el4_7.1.i686.rpm * GFS-kernel-xenU-2.6.9-80.9.el4_7.1.i686.rpm * GFS-kernheaders-2.6.9-80.9.el4_7.1.i686.rpm * gnbd-kernel-2.6.9-10.50.el4_7.1.i686.rpm * gnbd-kernel-hugemem-2.6.9-10.50.el4_7.1.i686.rpm * gnbd-kernel-smp-2.6.9-10.50.el4_7.1.i686.rpm * gnbd-kernel-xenU-2.6.9-10.50.el4_7.1.i686.rpm * gnbd-kernheaders-2.6.9-10.50.el4_7.1.i686.rpm * kernel-2.6.9-78.0.1.EL.i686.rpm * kernel-devel-2.6.9-78.0.1.EL.i686.rpm * kernel-doc-2.6.9-78.0.1.EL.noarch.rpm * kernel-hugemem-2.6.9-78.0.1.EL.i686.rpm * kernel-hugemem-devel-2.6.9-78.0.1.EL.i686.rpm * kernel-smp-2.6.9-78.0.1.EL.i686.rpm * kernel-smp-devel-2.6.9-78.0.1.EL.i686.rpm * kernel-xenU-2.6.9-78.0.1.EL.i686.rpm * kernel-xenU-devel-2.6.9-78.0.1.EL.i686.rpm